Description
At the time of its development and manufacture, the Condor pressure switch was built in accordance with the applicable, recognized rules of technology and is considered safe to operate. However, hazards may arise from the pressure switch if it is used by untrained personnel, improperly or not as intended. The safety information and the local legal regulations must be observed. The pressure switches are used for monitoring and controlling processes, switching pumps and compressors depending on the pressure present.
Technical data (DIN EN 60947-4-1):
Rated operating power (Ue =250 V / AC 3) | 20A |
Rated frequency | 50 Hz / 60 Hz |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 6 kV |
Protection class | IP 44 |
Pollution degree | 3 |
Protection class | I |
Mechanical life Switching cycles | > 5 X 105 |
Max. mechanical switching frequency Switching cycles/ h | 600 |
Switching piece life (AC 3) Switching cycles | > 1 X 105 |
Rated operating mode (class 120) Switching cycles/ h | 120 |
Temperature range | -5°c to +80°c |
Contact material | silver alloy |
Coordination type | 2 |
conditional rated short-circuit current | 3 kA |
Item net weight (kg) | 0.330000 |
---|---|
Edmac/OEM | OEM |
Package length (mm) | 65.00 |
Package height (mm) | 125.00 |
Package width (mm) | 93.00 |
Brand | Condor |
Stocked at Edmac | Yes |
Subcategory | Electronics & Instrumentation |
Condor series | MDR 1 |
ON/OFF Switch? | Yes |
Condor reference | 212140 |
Flange | F4 1/4" Alu |
Pressure range (bar) | 2,5 - 11 |
Edmac reference | 3004675452 |
Cross references | 212140, 3004675452, 608001100, MDR1/11-EA F4 1/4 |