Description
At the time of its development and production, the Condor pressure switch was built in accordance with the applicable, recognized rules of technology and is considered to be safe to operate. Nevertheless, dangers can emanate from the pressure switch if it is used by unqualified personnel, improperly or not as intended. The safety instructions and the local legal regulations must be observed. The pressure switches are used to monitor and control processes, switch pumps and compressors depending on the pressure.
Technical data (DIN EN 60947-4-1):
Rated operational power (AC 3) Ue =230 V (1~) / 400 V (3~) / 690 V (3~) |
5.5kW/ 7.5kW/ 7.5kW |
Rated frequency | 50 Hz |
Rated insulation voltage Ui | 690V |
rated conditional short-circuit current | 50kA |
Rated surge withstand voltage Uimp | 6kV |
Pollution level | 3 |
Protection class | I |
Mechanical life cycles | > 1 X 106 |
Max. Mechanical switching frequency Switching cycles/ h | 600 |
Contact life (AC 3) operations | > 5 X 104 |
Rated operating mode (class 120) switching cycles/ h | 120 |
Permissible minimum temperature | -5°c to +80°c |
degree of protection | IP54 |
Contact material | Silverlay. |
Item net weight (kg) | 0.730000 |
---|---|
Edmac/OEM | OEM |
Package length (mm) | 18.00 |
Package height (mm) | 9.00 |
Package width (mm) | 11.00 |
Brand | Condor |
Stocked at Edmac | Yes |
Subcategory | Electronics & Instrumentation |
Condor series | MDR 3 |
ON/OFF Switch? | Yes |
Condor reference | 212294 |
Flange | F4 1/2" Alu |
Pressure range (bar) | 4 - 11 |
Edmac reference | 3004051301 |
Cross references | 212294, 3004051301, 608003017 |